A semiconductor is a solid whose electrical conductivity sits between that of metals and insulators, roughly 10-8 to 103 S/cm, and can be shifted by orders of magnitude with doping, heat, light or an electric field. The cause is a bandgap: a forbidden energy range between filled and empty electron states.
Key takeaways
- Conductivity spans about 24 orders of magnitude across solids. Semiconductors occupy the middle: roughly 10-8 to 103 S/cm.
- Silicon’s bandgap is 1.12 eV at 300 K. GaAs is 1.42 eV, 4H-SiC about 3.26 eV and GaN 3.39 eV.
- Adding one phosphorus atom per million silicon atoms (5 × 1016 cm-3) raises conductivity by about six orders of magnitude.
- Every device is built from three interfaces: the p-n junction, the Schottky contact and the ohmic contact.
Conductivity of metals, semiconductors and insulators
Conductivity (σ, in siemens per centimetre) measures how easily current flows. Resistivity (ρ, in Ω·cm) is its inverse. The class boundaries below are conventions, not sharp physical limits.
| Class (300 K) | Conductivity σ (S/cm) | Resistivity ρ (Ω·cm) | Bandgap | Example |
|---|---|---|---|---|
| Metal | About 104 to 106 | About 10-6 to 10-4 | None (partly filled band) | Copper, ρ ≈ 1.7 × 10-6 |
| Semiconductor | About 10-8 to 103 | About 10-3 to 108 | About 0.2 to 6 eV | Intrinsic Si, ρ ≈ 2.3 × 105 |
| Insulator | Below about 10-8 | Above about 108 | Usually above about 5 eV | Fused quartz, σ near 10-18 |
What makes a material a semiconductor?
Two features define it. First, a bandgap that is wide enough to leave few free carriers at room temperature, yet narrow enough that some electrons can still be thermally or optically excited across it. Second, a conductivity you can control. In a metal, adding impurities barely changes conductivity. In a semiconductor, a few parts per million change it a millionfold.
Temperature behaves the opposite way to a metal. Heat a metal and lattice vibrations scatter electrons, so resistance rises. Heat a pure semiconductor and more electrons cross the gap, so resistance falls. The baseline articles are Definition of Semiconductors, Properties of Semiconductors and Conductivity.
What is a bandgap?
In a crystal, the energy levels of billions of atoms merge into continuous bands. The highest filled band is the valence band. The next band up, empty at absolute zero, is the conduction band. The gap between them, Eg, sets how many carriers exist at a given temperature, which wavelengths the material absorbs and emits, and how much electric field it can withstand before breakdown.
A wider gap means fewer thermal carriers, higher operating temperature and higher critical field. That is why wide-bandgap semiconductors such as SiC and GaN dominate high-voltage power. Band diagrams, direct and indirect gaps and the Fermi level are covered in the Energy Bands and Bandgap hub.
How does doping work?
Doping replaces a small fraction of host atoms with impurities. In silicon, a phosphorus atom has one more valence electron than it needs for bonding, so it donates a free electron and makes the crystal n-type. A boron atom has one fewer, so it accepts an electron and leaves a mobile vacancy called a hole, making the crystal p-type.
Typical doping runs from about 1014 to 1020 atoms per cm3, against roughly 5 × 1022 silicon atoms per cm3. Donor and acceptor choices for Si, GaAs, SiC and GaN, plus carrier mobility, are in the Doping and Charge Carriers hub.
What is a p-n junction?
A p-n junction forms where p-type and n-type regions meet. Electrons and holes diffuse across and recombine, leaving a thin depletion region of fixed charge with an internal field. The result passes current in one direction only. In silicon it turns on at about 0.6 to 0.7 V.
Diodes, LEDs, solar cells and bipolar transistors are all built on this interface. Metal contacts add two more types: the rectifying Schottky contact and the low-resistance ohmic contact. All three are compared in the Junctions, Contacts and Diodes hub.
Why compound semiconductors?
Silicon is cheap and well understood, but its 1.12 eV indirect gap limits it. It emits light poorly, and its critical field is about 0.3 MV/cm. Compound semiconductors, made of two or more elements, extend the range. GaAs and InP offer direct gaps and high electron mobility for RF and optoelectronics. SiC and GaN offer critical fields near 3 MV/cm for power electronics. A wider gap also keeps intrinsic carriers low at high temperature, the failure mode explored in Are semiconductors easily damaged by high temperature?.
For side-by-side numbers, use the materials index, the semiconductor properties table and the comparisons section. The III-V guide explains the main compound family.
The three sub-hubs
- Energy Bands and Bandgap: valence and conduction bands, bandgap values, direct vs indirect gaps, band diagrams and the Fermi level.
- Doping and Charge Carriers: donors and acceptors, n-type and p-type material, electrons and holes, mobility and recombination.
- Junctions, Contacts and Diodes: p-n junctions, Schottky barriers, ohmic contacts, heterojunctions and the 2DEG behind HEMTs.
All physics fundamentals guides
Physics sub-hubs
Core concepts
Reference tables
- Semiconductor Materials Index: Every Material in One Table
- Semiconductor Comparisons: Side-by-Side Property Tables
FAQs
- What are the main advantages of semiconductors over metals?
- Why are semiconductors special?
- Are semiconductors easily damaged by high temperature?
- What are the disadvantages of semiconductor?
- What are the advantages and disadvantages of semiconductor devices?
- What is the resistivity of a semiconductor?
- What is the principle of semiconductor?
- What are the 3 properties of semiconductors?
FAQ
Is silicon a semiconductor or a metal?
A semiconductor. Pure silicon has a 1.12 eV bandgap and a resistivity of about 2.3 × 105 Ω·cm at 300 K, about eleven orders of magnitude above copper. Doping brings it down to the 10-3 to 102 Ω·cm range used in devices.
Why does a semiconductor conduct better when it is hot?
Heat excites more electrons from the valence band into the conduction band, and each one leaves a hole behind. The number of carriers rises faster than scattering increases, so resistance falls. In a metal the carrier count is fixed, so only scattering rises.
What is the difference between a semiconductor and an insulator?
Mainly the size of the bandgap. Semiconductors run from about 0.2 eV to about 6 eV; insulators such as SiO2 are near 9 eV. The line is a convention: diamond and AlN are wide-bandgap semiconductors that behave as insulators unless doped.
Sources
- S. M. Sze and K. K. Ng, Physics of Semiconductor Devices, 3rd ed., Wiley.
- C. Kittel, Introduction to Solid State Physics, 8th ed., Wiley.
- Ioffe Institute, New Semiconductor Materials (NSM) archive, http://www.ioffe.ru/SVA/NSM/Semicond/

